How to Make an Ender Portal in Minecraft

Do you want to explore the exciting world of The End in Minecraft? If so, you need to make an Ender Portal first. Ender Portal is a mysterious block that will transport you to The End dimension of Minecraft. It’s not very difficult to make an Ender Portal, but you need to know the right steps. Don’t worry, we will guide you through the process step by step in this article.

First, you need to gather some resources to make an Ender Portal. You need 12 End Portal Frames and 12 Eye of Enders. You can find Eye of Enders by killing Enderman mobs or trading with Villagers. You can make End Portal Frames by arranging Obsidian blocks around a 3×3 square. Once you have all the resources, you need to place the End Portal Frames in the right pattern and add the Eye of Enders to activate the portal. Keep reading to know the detailed instructions on how to make an Ender Portal in Minecraft.

Section 1: Gathering required materials

Gathering materials to create an Ender Portal

Before you start building an Ender Portal, you need to gather some required materials. Below is a list of materials that you need to make an Ender Portal.

1. 12 Eyes of Ender
2. 14 Obsidian blocks
3. 1 Flint and Steel
4. A Diamond Pickaxe

What are Eyes of Ender?

Eyes of Ender are a critical element that you’ll need to activate the Ender Portal. They’re made by combining an Ender Pearl with Blaze Powder. Ender Pearls can be obtained by killing Endermen, while Blaze Powder is made by placing Blaze Rods in a Crafting Table.

How to get Obsidian blocks?

Obsidian blocks can be tricky to obtain, as they require a Diamond Pickaxe to be mined. Luckily, Obsidian can be made by pouring water over lava source blocks. To create Obsidian blocks, find a lava pool, and pour water over it. The lava will then turn into Obsidian blocks.

Why you need Flint and Steel?

Flint and Steel is used to ignite the Obsidian blocks, and activate the Ender Portal. Flint and Steel is made by combining an Iron Ingot with a piece of Flint. Flint can be obtained by mining gravel.

Section 2: Creating the Ender Portal frame

Creating the frame for the Ender Portal

Now that you’ve gathered all the required materials, it’s time to create the Ender Portal frame. Below is a step-by-step guide on how to build the frame.

Step 1: Find a location

Find a flat and open area to construct your Ender Portal. Ideally, you want to build it underground as it will be protected from environmental factors.

Step 2: Dig to bedrock

Once you’ve found a location, dig a hole straight down to the bedrock.

Step 3: Build the frame

Stand in the center of the bedrock hole and place 3 Obsidian blocks on either side of you to create a 3×3 square. Then, place the remaining Obsidian blocks in such a way that it creates a hollow frame that measures 5 blocks wide, and 4 blocks high.

Step 4: Place Eyes of Ender

Once you’ve created the frame, right-click the Eyes of Ender to place them in the frame. You’ll need a total of 12 Eyes of Ender.

Section 3: Activating the Ender Portal

Activating the Ender Portal

Now that you’ve built the Ender Portal frame, it’s time to activate it. Below is a step-by-step guide on how to activate the Ender Portal.

Step 1: Place Flint and Steel

To activate the Ender Portal, ignite the Obsidian block frame with Flint and Steel by right-clicking on it.

Step 2: Enter the Portal

Once the Ender Portal is activated, it will turn purple. Walk into the portal to enter the End Dimension.

Section 4: Preparing for the End Battle

Preparing for the End Battle

Now that you’re in the End Dimension, it’s time to prepare for the End battle. Below is a list of things that you need to do to prepare for the End battle.

Step 1: Fight Endermen and collect Ender Pearls

Endermen are hostile mobs that spawn in the End Dimension. Fight them to obtain Ender Pearls to craft Eyes of Ender.

Step 2: Locate the End Crystals

The End Crystals are the main component of the End boss fight. Make sure to locate them and understand their role in the End battle.

Step 3: Craft weapons and armor

Craft weapons and armor using the resources you gathered before entering the End Dimension. Make sure you have the best armor and weapons possible.

Section 5: Fighting the End Dragon

Fighting the End Dragon

Fighting the End Dragon is the most important part of the End Dimension. Below is a step-by-step guide on how to defeat the End Dragon.

Step 1: Destroy the End Crystals

Find the End Crystals, and destroy them. Destroying the End Crystals weakens the End Dragon.

Step 2: Attack the End Dragon

Use weapons and armor to fight the End Dragon. Aim for the glowing point on the dragon’s underside.

Step 3: Repeat until the End Dragon is defeated

Regularly break and destroy the End Crystals whenever they respawn, continue to attack the End Dragon until its health bar is depleted. Once you defeat the End Dragon, you’ll be rewarded with numerous items, including an Elytra.

Section 6: Conclusion

Conclusion

Ender Portals and the End Dimension are exciting and intriguing parts of Minecraft. With the help of this guide, you can now build an Ender Portal on your own. Remember to gather all the required materials, construct the frame correctly, activate the portal, and prepare for the End battle. The End Dimension is a dangerous place, but with the right knowledge and equipment, you can emerge victorious.

What You Will Need to Make an Ender Portal

Making an Ender Portal requires some essential items that you must have beforehand. To create an Ender Portal, you need to gather Obsidian blocks and Ender Pearls. In this section, we will discuss in-depth on what you will need to make an Ender Portal.

Obsidian Blocks

Obsidian blocks are required to create an Ender Portal. Obsidian blocks are only generated when water sources meet lava sources, so it might be challenging to obtain. You can mine obsidian using a Diamond Pickaxe, and it will take a minimum of eight obsidian blocks to make an Ender Portal frame. You can also create Obsidian using water and lava in Minecraft.

Ender Pearls

Ender Pearls are one of the most important resources needed to create an Ender Portal. These Pearls are dropped by Endermen or can be found in End City loot chests. You need a minimum of twelve Ender Pearls to create an Ender Portal. Once you have the required number of Ender Pearls, you are ready to start creating your Ender Portal.

Diamond Pickaxe

The Diamond Pickaxe is the ideal tool needed to mine Obsidian blocks. You must have a Diamond pickaxe to mine Obsidian blocks because it is a sturdy material, and other tools cannot break it. So before you can start mining Obsidian, make sure you have a Diamond Pickaxe.

Water bucket

You’ll also need a water bucket while creating Obsidian blocks. You can get a water bucket by right-clicking on water with an empty bucket. The water bucket will help you create Obsidian blocks, which are the main building blocks for the Ender Portal.

Lava bucket

Lava also plays a vital role in creating Obsidian blocks. You can also create Obsidian blocks with lava and water. To acquire a lava bucket, you must find lava pools and use an empty bucket to pick it up. With a lava bucket in your inventory, you are all set to make Obsidian blocks.

Bow and Arrow

Endermen can be an elusive creature to find in the game. They tend to disappear when you approach them. You need a ranged weapon like a Bow and Arrow to take out Endermen from a distance. Endermen can teleport to you, and a Bow and Arrow is an efficient way to keep them away from your character.

Armor and weapons

If you’re venturing into the Enderworld, it’s essential to protect yourself from attacks from the ender Dragon and Endermen. Equip yourself with the best armor and weapons you can afford. If you’re playing Minecraft Survival mode, you’ll need to craft your armor and weapons.

Torches and food

The Enderworld can be dark and treacherous, so it’s crucial to bring along torches to light your way. You’ll also need food to keep your hunger bar full during your journey through the Enderworld. With torches and food, you can explore the Enderworld and its dangers without worrying about your food or visibility.

Blocks and materials

You need blocks and materials, like wood, to craft items and building structures in the Enderworld. Come prepared with everything you need to craft and build things from blocks and materials in the Enderworld. It’s always better to come more prepared rather than underprepared.

Ender Chests

Ender Chests are a container block that allows you to access the same items anywhere in Minecraft. You can use Ender Chests to store important items that you do not want to lose in the Enderworld. Keep an Ender Chest handy while you’re exploring the Enderworld to keep your items safe.

How to Build the Ender Portal

After obtaining the necessary resources, it’s time to start building the ender portal. The process is a bit complex, but if you follow these simple steps, you’ll be able to create one in no time. Here are the steps:

Step 1: Find an Open Area

Your first step is to locate a large open area where you can build the end portal. It’s important to have enough space as the portal is quite large. You can create an end portal anywhere you like, but it’s best to find a flat and open space. Once you have selected the location, it’s time to start digging.

Step 2: Dig a Hole

The ender portal requires a special frame that is made out of end portal frames and an eye of ender. Follow the pattern below to create the frame:

Dig a hole that is three blocks wide and five blocks tall, and place the end portal frames in the holes. You’ll need 12 end portal frames in total.

Step 3: Activate the Portal

Once you’ve placed the end portal frames in the correct locations, it’s time to activate the portal. All you have to do is place an eye of ender in each of the end portal frames. You’ll need twelve eyes of ender in total.

When you’ve placed all twelve eyes of ender, the portal will light up and start to make a humming noise. That means you’ve successfully created the ender portal!

Step 4: Enter the End

Once you’ve successfully created the end portal, it’s time to enter the End. Stand in the center of the portal and jump into it. You’ll be transported to the End dimension, which is filled with all sorts of dangerous creatures.

Step 5: Defeat the Ender Dragon

The ultimate goal of creating the ender portal is to defeat the Ender Dragon and earn the rewards that come along with it. The Ender Dragon is located in the End dimension, and it’s a tough boss to beat. Make sure you’re well-prepared before you take it on!

In conclusion, creating an ender portal is a great achievement in Minecraft. It requires a bit of time and effort, but the rewards are worth it. Follow these steps, and you’ll be able to create an end portal in no time!

That’s How You Make an Ender Portal!

There you have it, a simple yet cool way to make an ender portal in Minecraft. We hope you enjoyed reading this article as much as we enjoyed writing it. Now, go ahead and make your own ender portal and explore the mysterious and deadly world of The End! Don’t forget to share your creations with us in the comments section below. Thanks for reading, and we’ll see you again soon with more exciting Minecraft adventures!