Have you been searching for a creative and unique way to display your plants? Look no further than the world of macrame! Macrame plant hangers are a stylish and contemporary way to showcase your greenery while adding a touch of bohemian elegance to any space.

Don’t know where to start with macrame? No worries! With a little bit of patience and practice, making your own macrame plant hanger is an achievable and rewarding DIY project. In this article, we will guide you through the steps to create your very own macrame plant hanger, from selecting the right materials to mastering the fundamental knots. So, gather your supplies and let’s get started!

1. Gathering Your Supplies:

Before starting your macrame plant hanger, you have to ensure that you have all the necessary supplies. The good news is that macrame plant hangers are not complicated to make and the materials needed are easily accessible. Some of the things you will require include:

  • Cotton cord- You can use untreated natural cotton cord or twisted cord to tie your knots.
  • Scissors- You will require a sharp pair of scissors to help you cut cords to length accurately
  • Measuring Tape- This will come in handy in taking measurements, including the length and diameter of the pot.
  • Pot- You will need a planter pot that fits well inside the macrame hanger.
  • S-hook- This is a metal hook that you can use to hang your plant hanger on a wall or beam.

2. Determine The Length Of Your Cord:

The length of the cord you need will depend on the height of your plant hanger. As a rule of thumb, you need approximately eight times the length of your pot’s height. For instance, if your pot is 10 inches high, you will require 80 inches of cord.

3. Preparing The Cord:

Cut four equal lengths of cotton cord. You may add extra cords for larger planters. Hold each rope and fold them in the middle to form a loop. You will have eight cords in total.

4. Creating The Top Knot:

Take a 12-inch piece of cotton cord and fold it in half. Then tie a knot around all eight cords above the middle length. The knot should be the same distance from the loop ends. You can adjust it to your desired hang length.

5. Making The Square Knots:

Take four cords and work with them in pairs. Make a square knot by the right rope over the left and under the middle cords, then the left cord under the center and up through the right side loop and pull tight. Make another knot with the left rope over the right, under the middle cords and up through the left side loop. Repeat this process with all pairs of cords.

6. Creating The Basket:

Continue making square knots, leaving 5-6 inches of space between each set of knots. Spread the ropes out as you progress, so the knots will sit in a diamond pattern.

7. Finishing The Hanger:

Once you reach the bottom of the pot, you will have eight cords remaining. Tie the cords together tightly, leaving 3-4 inches from the last knot. Cut off the excess rope and fray the tips.

8. Inserting The Plant:

Put your planter pot into the macrame hanger. Adjust your knots to ensure that the pot fits well and sits securely.

9. Hanging The Planter:

Hang the macrame hanger on an S-hook. You can suspend the plant from a beam or a wall in your room.

10. Enjoy Your Creation:

That’s it! Your macrame plant hanger is now complete. All that’s left is to step back, admire your creation, and enjoy your new plant arrangement. Congratulations!

Tools You’ll Need for the Project

Before getting started on your macrame plant hanger, it’s important to have all necessary tools on hand. Here’s a list of what you’ll need:

Cotton Rope or Hemp Cord

These ropes come in different sizes and thicknesses. Depending on the size of the plant you’re planning to hang, you may need a thicker or thinner cord. Opt for cotton rope or hemp cord, as they are sturdy, flexible and easy to work with.

Scissors

Make sure to grab a good pair of scissors that’s sharp enough to easily cut through the ropes. Dull blades will make the cutting process longer and more difficult.

Tape Measure

Measuring the length of your ropes before cutting them will help ensure that your hanger is symmetrical. Buy a flexible tape measure that can easily wrap around the rope or cord.

S Hook

An S hook is a great tool to use when hanging your plant hanger. It makes it easy to attach and detach the hanger from a hook or other support when needed.

Clipboard

Using a clipboard to securely clamp the ropes in place while working on the hanger is a helpful tool that will free up your hands for knotting.

Tape

Using tape to secure the ropes to the clipboard is a great way to ensure that the ropes stay in place while you’re working on the hanger.

Beads

If you want to add some extra flair to your macrame plant hanger, consider adding some beads. They can be used to create patterns, decorate the ropes or to finish off the hanger.

Pot and Plant

You can’t have a plant hanger without a pot and plant. Make sure the pot you choose is the right size for the plant you want to hang, and that the plant is in good condition to survive being hung.

Nail or Hook

To hang your macrame plant hanger, you’ll need a nail, hook or other support. Make sure the nail or hook is sturdy enough to hold the weight of the pot and plant.

Patience and Creativity

Making a macrame plant hanger requires patience, dedication and, most importantly, creativity. Take the time to plan out your design, experiment with knots and have fun with the project. Expressing your creativity will lead to a one-of-a-kind finished product that you can be proud of.

Materials Needed

If you are looking to create a macrame plant hanger, there are certain materials that you will need. Here is a list of the things you will need to get started:

Materials Description
Macrame cord The length of cord you need will depend on how long you want your hanger to be. However, we suggest purchasing at least 50-100 meters of cord to ensure you have enough.
Scissors A good pair of scissors will be required to cut the macrame cord to the desired length.
Tape Measure It is essential to have a measuring tape handy as you will need to measure and cut the macrame cord to the right length to create your plant hanger.
Wooden Ring or Hoop The wooden ring or hoop will serve as an anchor for the macrame knots. You can use any size of wooden ring or hoop, depending on the size of your planter pot.
Plant Pot The plant pot you will be using should be placed inside the macrame holder. Ensure that the pot is not too small or too big. You can choose any shape or size of the pot as long as it fits into the holder.

Step-by-Step Guide

Now that you have all the necessary materials, let’s dive into the step-by-step process of creating your macrame plant hanger!

Step 1: Measure and Cut the Cord

Measure and cut the macrame cord according to your desired length. Keep in mind the height of your plant pot and also the length at which you would like your plant hanger to hang.

Step 2: Fold the Cord in Half

Take the cord and fold it in half. Then, make a loop at the top, which will be used to hang the plant hanger.

Step 3: Create the Knots

Begin by creating a basic knot by wrapping one end of the cord around the other and pulling it through the loop you’ve created. Then repeat the same pattern with another cord. This will create two basic knots. Continue making the basic knots, either identical or alternating, until you have reached your desired length for the hanger.

Step 4: Add the Wooden Ring or Hoop

Insert the wooden ring or hoop at the top of the cord, pulling both ends of the cord through it. Then, tie a knot underneath the ring to keep it in place.

Step 5: Place the Plant Pot and Hang the Hanger

Finally, place the plant pot inside the holder. Make sure it is nestled securely inside, so it won’t tip over. Hang the hanger using the loop you made in Step 2, and you’re done!

Congratulations! You have now created a beautiful macrame plant hanger that will be a unique and stunning addition to your indoor or outdoor space.

Happy Crafting!

Thank you for taking the time to learn how to create your own macrame plant hanger. We hope you found this tutorial helpful and that you are excited to make your own unique piece of decor. Remember to have fun and take your time with each knot. Don’t worry if you make mistakes, it’s all part of the process. Keep practicing and refining your skills and before you know it, you’ll be creating all sorts of beautiful macrame pieces. Don’t forget to come back and visit us for more DIY inspiration and ideas. Happy crafting!