DIY Guide: How to Make Your Own Corn Hole Boards

Cornhole is a fun and popular lawn game that can be played by people of all ages. It consists of two game boards placed opposite each other and players take turns throwing bean bags at the boards, aiming for the hole in the center. If you’re looking to make your own cornhole boards, you’ve come to the right place! With a few tools and some basic materials, you can create your own custom-designed boards and enjoy hours of outdoor entertainment.

Firstly, you need to decide on the size of the boards you want to make. Most cornhole boards are two feet wide by four feet long, but you can also make smaller ones if you prefer. Once you have your measurements, you’ll need to gather the necessary materials, such as plywood, screws, nails, paint, and bean bags. Don’t forget to consider the design of your boards as well, as you can paint them with your favorite sports team colors or create your own unique graphic. So, let’s get started and make some cornhole boards that you and your friends will love.

Introduction:

Cornhole is a popular outdoor game that has been gaining popularity in recent years. Also known as bean bag toss, the game involves throwing bean bags towards a slanted board with a hole in it. To play the game, you need to have a cornhole board. In this article, we will guide you through the process of creating your own custom cornhole board. With a bit of effort, you can have your own custom board that reflects your personality and style.

1. Materials and tools to make cornhole boards

Before starting, you need to collect all the necessary materials and tools. The materials needed are two plywood boards, 2×4 wood boards, wood screws, wood filler, wood glue, primer, paint, and clear coat. The tools required include a drill, saw, jigsaw, screwdriver, measuring tape, and power sander.

2. Steps to take in creating the cornhole board

Cut the plywood boards to measure 24” x 48.” Cut the 2×4 wood boards into four legs, each measuring 9” long. Attach the legs to the boards using screws and wood glue. You can then paint the board a solid color.

3. Cutting your Cornhole Board’s Hole

Using a jigsaw, you can then cut a 6” hole at the center of the board. Make sure that the hole is 9” away from the top of the board and 12” away from the sides. You can use a bowl or compass to draw a perfect circle before cutting.

4. Customizing Your Cornhole Boards

After creating the board, you can customize it to reflect your style. You can paint it with your team colors, add a logo or design to it, or even wrap it in vinyl. Do anything that makes it stand out.

5. Applying Primer before painting

Before painting, it’s essential to apply primer to ensure that the paint adheres correctly to the board. Spray paint primer is the best choice for cornhole boards. You can give a light sanding to the board after applying primer.

6. Choosing Your Paint Color

With the primer dried, choose your paint color and apply a base coat to the board. An acrylic paint is the most popular choice for painting cornhole boards. You can achieve better results by applying two or three coats of paint.

7. Painting Your Cornhole Board

After applying the base coat, you can then paint your custom designs or logo. Be creative and give your board a unique and stylish look.

8. Applying Clear Coat

After painting the board, allow the paint to dry completely before applying a clear coat. A clear coat will protect your board from scratches and moisture.

9. Sanding After Each Coat

Between each coat of paint or clear coat, give your board a light sanding. This ensures that the surface is smooth and free from lumps and bumps.

10. Lastly, it’s time to play

After all the steps, you can take your new custom cornhole board out for a test. Invite your friends and family over for a fun-filled game and enjoy your custom creation.

Conclusion:

Making your own custom cornhole board can be a fun and exciting project. By following the steps listed in this article, you can create your unique and stylish board that reflects your personality. With a bit of creativity and patience, you can have a board that will be the talk of the town.

Materials Needed

Now that you’re well on your way to building your very own cornhole boards, let’s dive into the materials you’ll need to get the job done! Luckily, most of these tools can be found at your local hardware store or online.

1. Plywood

For each board, you’ll need a piece of plywood that measures 2ft x 4ft in size and ½ inch in thickness. You can choose to use either birch, sanded pine, or Baltic birch plywood for your project. However, we recommend using sanded birch for its smooth and durable finish.

2. Two-by-fours

Two-by-fours are necessary to construct the frames of your cornhole boards. You’ll need eight pieces that measure 48 inches in length and four pieces that measure 21 inches in length. We recommend using pine or spruce wood for the frame due to its durability and affordability.

3. Wood screws

Make sure to have a good supply of wood screws that measure 1 ½ inch in length for connecting the frame to the plywood and 2 ½ inch screws for attaching the legs.

4. Wood filler

Wood filler comes in handy for filling in any gaps or holes in your boards for a smooth finish. Look for wood filler that is paintable and sandable to ensure a flush finish.

5. Sandpaper

Consider using 60-grit sandpaper to smooth out any rough edges and a 220-grit sandpaper for a polished finish.

6. Paint or stain

Be sure to choose an outdoor-friendly paint or stain to make your cornhole boards weather resistant. You can use any color or design that suits your personal style.

7. Compass or string

For precise measurements, a compass or string is a must-have tool to create the rounded corners of your boards.

8. Jigsaw or saw

A jigsaw makes cutting the holes for your boards a breeze, while a saw can be used to cut your plywood and two-by-fours to size.

9. Drill

You’ll need a drill to make pilot holes for your wood screws and to attach your legs.

10. Measuring tape

Last but not least, a measuring tape is crucial for accurate measurements throughout the entire process. Keep it handy for ensuring your plywood and two-by-fours are cut to the precise sizes needed for your cornhole boards.

With all of these materials at your disposal, your cornhole board construction project is well on its way to completion. In the next section, we’ll dive into the detailed steps you need to take to build your boards and make them a masterpiece!

5 Steps to Making Your Own Corn Hole Boards

If you’re interested in making your own corn hole boards, there are just a few simple steps you need to follow. In this section of the article, we’ll walk you through each step in detail.

1. Gather Supplies

   Before you start building your corn hole boards, you need to gather all the necessary supplies. Here’s what you’ll need:

   • 2 pieces of 2×4 lumber, 8 feet long
   • 2 pieces of 2×4 lumber, 4 feet long
   • 1 sheet of 4×8 plywood, preferably sanded
   • 4 legs (you can make these using scrap wood)
   • Stain or paint (optional)
   • Screws and a hammer or drill
   • Saw (preferably a mitre saw)
   • Measuring tape
   • Pencil
   • Circular object to trace the holes (e.g. a pitcher or paint can)
   • Paint or duct tape to decorate the boards (optional)

2. Cut Wood to Size

   After you’ve gathered all your supplies, it’s time to cut the wood to the appropriate size. Here are the measurements you’ll need to follow:

   • Cut the 2x4s into 4 pieces that are each 22 inches long for the frame.
   • Cut the 2x4s into 4 pieces that are each 11.5 inches long for the legs.
   • Cut the plywood in half, so you have two 2×4 foot pieces.

3. Assemble the Frame

   Next, it’s time to assemble the frame of the corn hole board. Follow these steps:

   1. Lay two of the 22-inch 2x4s on a flat surface parallel to each other with roughly 3 feet (or at your preferred distance) of space between them.
   2. Place one of the 4-foot 2x4s between the two 22-inch 2x4s about a foot from the bottom.
   3. Screw the frame together using four screws per joint.
   4. Repeat with the other two 22-inch 2x4s and the remaining 4-foot 2×4.

4. Add Legs

   Now it’s time to add the legs to your corn hole boards. Follow these steps:

   1. Grab two of the 11.5-inch 2x4s.
   2. Screw them about 3 inches down from the top of the frame on either side (make sure they are perpendicular to the frame).
   3. Repeat with the other two legs on the opposite end of the frame.

5. Make the Holes

   The last step is to make the holes in the corn hole boards. Here’s how to do it:

   1. Take a circular object about 6 inches in diameter and trace the edge on the top center of each board.
   2. Cut out the circles with a jigsaw.
   3. If desired, sand the edges of the holes smooth.

By following these simple steps, you’ll have a brand-new pair of corn hole boards that are perfect for backyard BBQs, tailgating parties, or simply spending a lazy afternoon in the park with friends and family. So why wait? Start gathering your supplies today and get ready to enjoy hours of fun playing corn hole with your loved ones!

Now Go Have Some Fun!

Thanks for reading all the way through on how to make corn hole boards. By following these steps, you’ll be able to enjoy hours of fun with family and friends. Don’t forget to add your own unique personal touches to make them truly your own. If you have any questions or want to share your creations with us, please do so in the comments section below. We hope you enjoy making your own corn hole boards as much as we did! Come back soon for more DIY ideas and inspiration.