DIY Guide: How to Make a Sploof for Smoke Odor Control

If you’re someone who loves to smoke weed or cannabis, then you must have had moments where you had to deal with the unpleasant smell of smoke. Whether it’s the smell-evident of a joint, the odors from a bong, or even the smell of fresh bud, there’s always a chance that the pungent aroma could catch the attention of nosy neighbors, parents, or roommates. That’s where a sploof comes into the picture: a simple and efficient tool that helps you smoke discreetly by reducing the smells.

A sploof is a device that filters out the smoke by actively removing its odor. It’s a nifty little gadget that can significantly reduce the smell of cannabis and any other type of smoke. While you can easily buy sploofs online or from your local head shop, you can also create one yourself without spending a lot of money. In this article, we will walk you through everything you need to know about sploofs, including how to make one yourself with readily available household items.

How To Make A Sploof: The Ultimate Guide To Stealth Smoking

Are you tired of your roommate or parents getting on your case about the smell of weed coming from your room? Have no fear – the sploof is here! A sploof is a device that filters the smoke from your bowl, bong, or joint, and reduces the amount of odor that lingers. In this guide, we will show you just how easy it is to make your own sploof at home.

1. Gather your materials.

The first step in making a sploof is gathering the necessary materials. You will need a plastic bottle, a pair of scissors, a rubber band, and some dryer sheets.

2. Prepare the plastic bottle.

Take the plastic bottle and remove the cap. Using your scissors, cut off the bottom of the bottle.

3. Stuff the bottle with dryer sheets.

Take a handful of dryer sheets and stuff them into the bottle. Make sure they are packed tightly so that the smoke will filter through them.

4. Create the sploof exit hole.

On the side of the bottle that you cut the bottom off of, use the scissors to poke a few small holes. This will be the exit point for the smoke to escape.

5. Secure the dryer sheets.

Take a few more dryer sheets and lay them flat on a table. Place the bottle on top of the sheets and wrap them around the bottle. Secure the dryer sheets in place with a rubber band. This will ensure that the smoke passes through the sheets before exiting the sploof.

6. Test your sploof.

Before using your sploof for smoking, make sure it works properly. Take a hit from your bowl, bong, or joint and blow the smoke through the sploof. If you can still smell the smoke, you may need to add more dryer sheets or pack them more tightly.

7. Use your sploof.

When smoking, hold the sploof to your mouth and blow the smoke through the exit hole. This will filter the smoke and reduce the odor.

8. Maintain your sploof.

Over time, the dryer sheets will become dirty and less effective. Be sure to replace them every few uses.

9. Experiment with different scents.

If you want to add an extra layer of scent-masking, try switching up the type of dryer sheets you use. There are a variety of scents available, from lavender to pine, that can help neutralize the smell of smoke.

10. Consider using a portable sploof.

If you are on the go and need to smoke discreetly, consider purchasing a portable sploof. These sploofs are small and easy to carry, making them perfect for smoking in public or on-the-go.

In conclusion, making a sploof is an easy and inexpensive way to reduce the smell and smoke of your marijuana use. Whether you are a college student trying to stay under the radar, or simply looking for a way to be more considerate of others, a sploof is a great option. Follow these steps and you’ll be on your way to enjoying your smoke session without the fear of being caught.

Materials Required to Make a Sploof

Now that you know what a sploof is, it’s time to talk about the materials required to make one. Before getting into the details, let us remind you not to use any prohibited ingredients or items while making a sploof.

1. Empty Toilet Paper or Paper Towel Roll: To make the body of your sploof, a hollow cardboard roll is a must-have. If you don’t have an empty toilet paper roll, you can use a paper towel roll and cut it to a smaller size.

2. Scissors: You’ll need a pair of scissors to trim the cardboard roll and cut the materials needed to make a sploof.

3. Rubber Bands: You’ll need two rubber bands to hold the dryer sheets or coffee filters in place. Make sure they’re not too tight or too loose.

4. Dryer Sheets or Coffee Filters: These are key ingredients used to filter the smoke that comes out of the sploof. Dryer sheets are easily available, but if you don’t have them, you can use coffee filters.

5. Activated Carbon (Optional): Activated carbon works as an extra filter for smoke. You can get it in pet stores or online, but it’s not a necessary ingredient.

6. Tape: Use tape to cover the open ends of your sploof and to seal the edges of the dryer sheets or coffee filters.

7. Essential Oil (Optional): Essential oil has a pleasant aroma and can mask the smell of smoke with a better scent. Use it only if you have it, not as a necessary ingredient.

8. A Pen or Pencil: Use a pen or pencil to poke holes in the cardboard roll. Poke the holes on one end and leave the other end open.

9. A Plastic Bag or Container to Hold the Materials: Use a plastic bag or container to keep all the materials organized and in one place.

10. Clean and Safe Environment: It is essential to work in a clean and safe environment. Make sure you have adequate light to see what you’re doing and work in a well-ventilated area. Also, don’t forget to wash your hands before and after handling the materials.

With these materials in hand, we can proceed to the next section, where we’ll teach you how to assemble the sploof step by step.

Materials Required to Make a Sploof

Making a sploof at home is quite an easy task. All you need are a few common household items, and you are good to go. Here are the materials you would need to create your homemade sploof:

1. Paper Towel or Toilet Paper Roll

This will be the base of your sploof. You can either use a paper towel roll or a toilet paper roll. A paper towel roll is a better choice as it is longer, hence more effective.

2. Dryer Sheets

Dryer sheets are crucial in eliminating the odor of the smoke. The fabric softeners used in the sheets help mask the smell.

3. Elastic Band

You would need an elastic rubber band to hold the dryer sheets close to one end of the roll.

4. Tape

You would need tape to attach the dryer sheets to the roll. A masking tape would come in handy.

5. Scissors

Use scissors to cut the dryer sheets to a size that would fit the circumference of the roll.

Instructions to Make a Sploof

Now that you have gathered the materials, let’s get started with the process of making a sploof.

Step 1: Cut the roll

Firstly, cut the roll approximately one-third from one end. You can use scissors to cut it. Make sure not to cut it completely into half, but till the point where it still can be held by one side.

Step 2: Attach dryer sheets

Take the cut end of the roll and put in three to four dryer sheets one by one. They should be large enough to wrap around the opening of the roll. Hold them in place with an elastic band.

Step 3: Cover with tape

Cover the elastic band with tape to make it look neat. The tape will also stop the elastic from slipping off.

Step 4: Add more dryer sheets

Put one more dryer sheet in the tube. You can also add more sheets if burnt smells pass through and eliminate the odor more effectively.

Step 5: Your Sploof is ready

Your homemade sploof is now ready to use. Exhale the smoke through the opposite end from where you inserted the dryer sheets.

Making your own sploof is a very budget-friendly option. Not only is it simple and easy to make, but it is also an environmentally friendly alternative to store-bought air-filters. So next time you need to get by with smoking indoors, you can make your home sploof with a few supplies and take care of the odors.

Sayonara, Smelly Smoke!

And that’s it, folks! You have now learned how to make your very own sploof to rid your smoking area of any unwanted smells. We hope that this tutorial has been helpful and informative. Make sure to show off your new creation and impress your smoking buddies! Don’t forget to come back and visit us for more lifestyle and DIY articles. Thanks for reading, and happy smoking!