DIY Guide: How to Make a Shotski in 6 Easy Steps

Ready to upgrade your next party’s drinking game? Look no further than the Shotski. This ski-based drinking game has become a staple at ski towns and cabin getaways across the world—perfect for a night of fun with friends and family. Want to learn how to make your own Shotski? You’re in the right place.

The premise of the game is simple: fill shot glasses and attach them to a ski, so everyone drinks in unison. You could purchase a pre-made Shotski, but why pay for something you can make at home? Keep reading to learn the step-by-step process for crafting your own DIY Shotski. With just a few tools and a little bit of effort, you’ll be the life of the party at your next gathering.

Section #1: Gathering the Materials

Gather the Materials Needed to Build a Shotski

Building a shotski is a fun and easy DIY project that requires basic tools and materials. Before you start building, make sure you have all the necessary materials at your fingertips. You will need the following supplies:

1. A ski: The ski is the most important component of a shotski. You can use an old ski that is no longer in use or buy a new one from a sports equipment store.

2. Shot glasses: You will need at least three shot glasses the same size and shape for your shotski.

3. Epoxy: Epoxy is a strong adhesive that will help hold everything together.

4. Sandpaper: You may need to sand down the ski to create a smooth surface.

5. Masking tape: Masking tape will help you mark out where you want to place the shot glasses.

6. Drill and drill bits: You will need to drill holes in the ski to hold the shot glasses.

7. Jigsaw: A jigsaw will help you cut the ski to the desired length.

8. Safety goggles: Always wear safety goggles when drilling or working with power tools.

9. Measuring tape: Use a measuring tape to ensure the shot glasses are evenly spaced.

10. Screwdriver: Use a screwdriver to tighten the screws that hold the shot glasses in place.

Make sure you have all the materials before starting your shotski project.

Section #2: Preparing the Ski

Prepare the Ski for Your Shotski

Before you start building your shotski, you need to prepare the ski. Use sandpaper to sand down any rough or uneven surfaces. This will create a smooth surface for the shot glasses to rest on. Next, measure and mark where you want the shot glasses to go. You can use masking tape to make sure the markings are level and even.

Use a jigsaw to cut the ski to the desired length. Be sure to wear safety goggles and work slowly and carefully. Once you have cut the ski to the desired length, sand the edges to create a smooth finish.

Section #3: Drilling the Holes

Drill Holes for the Shot Glasses

Use a drill to make holes in the ski where you marked with the masking tape. Be sure to use a drill bit that is the same size as the shot glass base. Start by drilling a pilot hole to guide the larger drill bit. Then, drill the larger hole for the shot glass.

It is important to drill the holes straight and make them deep enough so that the shot glasses will not wobble or move around when filled. Be careful not to drill too deeply, or you may damage the ski.

Section #4: Applying the Epoxy

Apply Epoxy to Secure the Shot Glasses

Once the holes have been drilled, apply epoxy to the bottom of each shot glass. This will help hold them in place and prevent any leaks. Be sure to use a strong epoxy that will bond to both the ski and the shot glass.

Carefully insert the shot glasses into the holes and use a level to ensure they are straight. Wait for the epoxy to dry completely before moving on to the next step.

Section #5: Adding the Screw Supports

Add Screw Supports to Hold the Shot Glasses in Place

To secure the shot glasses in place, use a screwdriver to insert a screw into the ski on either side of each shot glass. This will hold the shot glass in place and prevent any movement or wobbling.

Be sure to tighten the screws firmly, but not too tightly, as this may crack the ski or the shot glass. Test each shot glass to make sure it is securely in place.

Section #6: Adding the Finishing Touches

Add Finishing Touches to Your Shotski

Once you have secured the shot glasses in place, you can add some finishing touches to your shotski. You can paint the ski, add stickers or decals, or even carve designs into the wood. Get creative and make your shotski unique.

Section #7: Choosing the Right Shot Glasses

Choosing the Right Shot Glasses for Your Shotski

When choosing shot glasses for your shotski, make sure they are all the same size and shape. This will ensure that the shots are all the same amount and that the glasses fit comfortably into the holes you have drilled.

There are many types of shot glasses available, including traditional glass, plastic, and metal. When choosing your shot glasses, consider the durability, cost, and aesthetic appearance.

Section #8: Getting Ready to Celebrate

Get Ready to Celebrate with Your Shotski

Once you have built your shotski, it’s time to celebrate. Invite your friends over and fill the shot glasses with your favorite spirits. Lift the shotski and take the shot together for added fun.

A shotski is a great addition to any party or gathering, and it’s a fun way to bring people together. Remember to drink responsibly and have fun.

Section #9: Maintaining Your Shotski

Maintaining Your Shotski for Longevity

To ensure your shotski lasts for a long time, it’s important to maintain it properly. After each use, clean the shot glasses and wipe down the ski with a cloth. Store the shotski in a dry place to prevent any moisture damage.

If you notice any damage or wear and tear, fix it immediately. This will prevent further damage and prolong the life of your shotski.

Section #10: Final Thoughts

Final Thoughts on Building a Shotski

Building a shotski is a fun and easy DIY project that anyone can do. With the right tools and materials, you can create a unique and functional shotski that will be the highlight of any party.

Remember to always drink responsibly and have fun with your shotski. We hope our guide on how to make a shotski has been helpful and that you enjoy building your own shotski. Cheers!

Materials Needed for Making a Shotski

Making a shotski is a fun and exciting way to liven up any party or gathering. A shotski is usually made from a ski, and it is designed to hold multiple shot glasses. Typically, a shotski can accommodate four to six shot glasses that can be shared by partygoers as they commemorate a special occasion or simply bond over common interests. The following are the essential materials you will need to make a shotski.

1. A Ski

The ski will form the base of your shotski. You can use any ski that you no longer use, or if you don’t own one, you can usually find old skis at thrift stores or online marketplaces.

2. Shot Glasses

You will need shot glasses to fill your shotski. Depending on the number of people sharing the shotski, and how many shots you want each person to take, you can vary the number of shot glasses you need.

3. Epoxy or Adhesive

Epoxy is a two-part adhesive that is best suited for this project. However, you can also use other adhesives that are strong enough to hold the shot glasses in place.

4. Sandpaper

You’ll need sandpaper to prepare the ski surface before attaching the shot glasses’ bottoms.

5. Measuring Tape

You’ll need a measuring tape to measure the distance between the shot glasses to ensure they remain evenly spaced.

6. Drill

You’ll need a drill to make holes for the shot glasses.

7. Saw

You may need to cut down the ski if you want it to be a certain length.

8. Paint

Paint is optional, but you can choose to paint the ski or shot glasses to create your desired look.

9. Painter’s Tape

You’ll need painter’s tape to mark the points where you will drill holes.

10. Screwdriver

You’ll need a screwdriver to screw in the screws that hold the shot glasses in place.

With all these materials ready, you can easily follow the steps that will be outlined in the next section to make a shotski that will become an instant hit at any party or event.

Materials Needed to Make a Shotski

Making a Shotski is a fun and easy project that can be done with a few basic materials. Before getting started, be sure to gather all the necessary items to avoid any last-minute trips to the store. Here are the must-have materials for making a Shotski:

1. Ski – The ski is the main component of the Shotski. Look for one that is long enough to accommodate the desired number of shot glasses.

2. Shot glasses – Choose sturdy shot glasses that are compatible with the ski’s width, preferably ones without handles to make the Shotski easier to use.

3. Tape measure – To ensure that the shot glasses are evenly spaced and level on the ski, a tape measure is essential.

4. Drill and drill bits – A drill is needed to make the holes for the shot glasses in the ski. Use the appropriate drill bit size to match the diameter of the shot glass stem.

5. Sandpaper – Sandpaper is necessary for smoothing any rough spots or sharp edges on the ski.

Once all these materials are gathered, it’s time to get started on making the Shotski.

Step-by-Step Instructions for Making a Shotski

Making a Shotski is an incredibly easy and fun project that can be completed in five easy steps. These are:

1. Preparing the Ski – First, prepare the ski by sanding it to a smooth finish, then decide where to drill the holes. Use the tape measure to mark where the shot glasses will be placed. Ensure the marks are levelly spaced and the same distance from one another.

2. Drilling – Drill the holes on the spot marks. Ensure the holes are wide enough to fit the stem of the shot glasses.

3. Fitting the Glasses – With all the holes drilled, insert the shot glasses into each hole until they fit snugly.

4. Securing the Shot Glasses – Turn the ski over and secure the shot glasses in place from the bottom of the ski using duct tape or a similar adhesive.

5. Test Run – Lastly, it’s time to test the Shotski by pouring shots into the glasses simultaneously, raising the ski, and drinking. Enjoy!

Tips for Making the Best Shotski

While making a Shotski, it’s important to keep a few tips in mind to create the best experience possible. These tips are:

1. Choose the right ski – When choosing a ski, pick one that’s long enough to accommodate multiple shot glasses, sturdy, and has a smooth surface.

2. Make sure shot glasses are level – Ensure the shot glasses are level on the ski by double-checking with a bubble level or the edge of a table.

3. Use sturdy shot glasses – Use durable shot glasses without handles that are compatible with the ski’s width.

4. Use a drill that matches the stem size – Choose the right drill for the shot glass stem diameter to ensure a perfect fit.

5. Safety should be a priority – When drilling, wear protective eyewear, and gloves to avoid injuries.

Conclusion

Making a Shotski is a fun and straightforward project that requires a few basic materials and tools. Follow the five steps and tips mentioned above to create a perfect Shotski to use for your next party or gathering. Most importantly, ensure safety when making a Shotski and follow manufacturer instructions when using power tools. Happy Shotski-making!

Grab a Shotski and Let’s Celebrate!

Thanks for reading and joining me on this journey to create a shotski. Share this article with your friends and try these steps out for yourselves. Remember to have fun while making your shotski and while using it to cheers – it’s all about celebrating and enjoying life with those around you. Make sure to visit again for more fun DIY projects and ways to make the most of your time with loved ones. Cheers!