DIY: How to Resize a Ring at Home

Rings are not just pieces of jewelry, they hold sentimental value and are often meaningful to those who wear them. Unfortunately, as time goes by, our fingers can expand or contract, making our beloved rings feel too tight or just plain uncomfortable to wear. If you don’t want to pay a jeweler to resize your ring, there’s an inexpensive and easy way to make a ring bigger at home.

Before you start stretching your ring, it’s important to understand the type of metal it’s made of. If it’s a precious metal like gold, silver, or platinum, you’ll need to be careful with your stretching techniques. On the other hand, if it’s a non-precious metal like brass or copper, you can be a bit more rough. So, let’s dive into the step-by-step process of making your ring bigger at home!

10 Ways to Make Your Ring Bigger at Home

Are you having trouble wearing your favorite ring because it’s a little too snug on your finger? Maybe you received a precious heirloom ring that you would love to wear, but it’s a size or two too small. Don’t worry, you don’t have to take it to a jeweler to resize it. Here are ten ways to make your ring bigger at home quickly and easily.

1. Use Soap and Water

Using soap and water may sound too simple, but it’s an effective way to make your ring bigger. Rub some soap on your finger, including the part where the ring sits. Then, rinse your finger with cold water to tighten the ring slightly. Slide the ring off while it’s still wet and let it dry. Once it’s dry, put the ring back on your finger.

2. Use Olive Oil and Baby Powder

Mix equal parts of olive oil and baby powder to create a paste. Apply the paste to the inside of the ring, ensuring that it covers the area where the ring contacts your skin. Wipe off any excess paste with a soft cloth. Slide the ring onto your finger and let it sit for a few hours before removing it.

3. Use Tape

Use a thin strip of tape to wrap around the inside of the ring. Ensure that the tape is snug, but not tight, as it will allow the ring to slide over your knuckles. Use a sharp blade to trim the excess tape from the inside of the ring to avoid any uncomfortable feeling.

4. Use a Ring Guard

Ring guards are small metal bands that fit around the inside of the ring. They are available in various sizes and can be easily adjusted to accommodate different ring sizes. Ring guards can be purchased online or from a jewelry store.

5. Use a Rubber Band

Wrap a thin rubber band around the inside of the ring. Position the rubber band underneath the ring to make sure it’s secure. This will help to grip your finger, preventing the ring from moving around too much.

6. Use a Zip Tie

Find a small zip tie that can fit around the inside of the ring. Slide the zip tie over the ring and tighten it around the band until it’s snug, but not tight. Use scissors to trim the excess material from the zip tie, ensuring the edges are smooth to prevent rubbing or scratching.

7. Use Hot Water

Fill a bowl with hot water and let your ring sit in it for a few minutes. The hot water will expand the metal, making the ring fit looser. After a few minutes, remove the ring and dry it off. If the ring is still too small, repeat the process as needed.

8. Use a Pencil

Take a wooden pencil with a rounded end and slide it through the ring. Using a twisting motion, gently widen the ring. Be careful not to apply too much pressure, or the ring may crack or become misshapen.

9. Use Denture Adhesive

Apply a small amount of denture adhesive to the inside of the ring band. Stick the ring on your finger, and the adhesive will help to keep it in place. Ensure that you clean the ring afterward to remove any residue.

10. Use a Professional Ring Sizing Kit

If you regularly wear rings, a professional ring sizing kit may be an excellent investment. These kits contain various ring sizers that can be attached to the inside of the ring band to increase its size. They can be found online or from jewelry stores.

Conclusion

In summary, making your ring bigger at home is quick and easy. You don’t need to pay someone to do it for you. From using soap and water to using a professional ring sizing kit, there is a solution for everyone. You just have to choose which one works best for you!

Tools Required to Make a Ring Bigger at Home

Making a ring bigger at home is a simple and cost-effective way to ensure that your favorite piece of jewelry fits you perfectly. However, before you begin the process, it’s essential to make sure that you have all the necessary tools to complete the task successfully. Here are the tools you’ll need:

1. Ring Mandrel

A ring mandrel is a cylindrical tool that is used to shape rings. It’s essential to have a ring mandrel as it helps you get an accurate measurement of the ring size you need to increase it by.

2. Hammer

To increase the size of your ring, you’ll need to hammer it gently on the mandrel to shape it into a larger size. So, a hammer is an essential tool that you’ll need to have in your toolbox.

3. Rubber or Nylon Mallet

A rubber or nylon mallet is essential to shape your ring gently. It is advised to use a rubber or nylon mallet as it will provide the right amount of force needed to shape the metal without damaging it.

4. Sandpaper

Sandpaper is needed to file and sand the areas of the ring that need adjustment. It will help you smooth out any rough or sharp edges left by the hammering process and create a seamless finish.

5. Vice or Pliers

Vice or pliers are essential to hold the ring securely in place while you are hammering it. It helps you control the ring’s movement and keeps it steady while you apply the pressure needed to reshape it.

6. Tape Measure

A tape measure is an essential tool that you’ll need to measure the exact size of your ring before and after the process. It will help you know how much you have expanded the metal and ensure that it fits you correctly.

7. Protective Gloves

While working on your ring, you must protect your hands with gloves. It will not only protect your skin from sharp metal edges but will also prevent any oil or grease from your skin from transferring to the metal, which can prevent the metal from being shaped.

8. Safety Glasses

When hammering the ring, tiny metal pieces can fly off and cause serious damage to your eyes. Therefore, safety glasses must be worn to protect your eyes from any hazardous debris.

9. A Bench Block

A bench block is a flat and sturdy surface that is useful to hold the ring while hammering it. It provides an evenly distributed force while hammering and allows the process to be successful.

10. Cleaning Solutions

After expanding your ring, it’s essential to clean it correctly. It’s recommended to use a mild soap solution or metal cleaning solution to remove any dirt or grime accumulated during the fabrication process. Clean and dry the ring thoroughly before wearing it again.

In conclusion, having the right tools is the first step to making your ring bigger at home. Without these useful tools, the process can become more challenging, if not impossible. While investing in a high-quality tool may seem expensive, it’s well worth the investment in the long run. With necessary tools in hand, you’re ready to tackle the process of expanding your ring.

Ways to Make a Ring Bigger at Home

If you have a ring that doesn’t fit you anymore, there’s no need to keep it in your jewelry box and let it collect dust. Instead, try these easy and affordable ways to make your ring fit you perfectly again.

Using a Ring Guard

A ring guard is a small, plastic or metal insert that is placed inside the ring. It is an excellent way to resize a ring because it doesn’t damage the ring, and it will keep the ring in the same shape. To use a ring guard, follow these steps:

• Clean your ring: Before inserting a ring guard, clean the ring properly, so no dirt or debris gets trapped under the guard.
• Slide the ring guard: Slide the ring guard over the shank of the ring until it fits snugly. Make sure the ring guard is not visible on top of the ring.
• Cut the excess: If the ring guard is too long, cut off the excess, so it doesn’t stick out from the sides of the ring.

Using a Ring Sizer

A ring sizer is a tool that helps to measure the size of a ring accurately. With a ring sizer, you can adjust the size of your ring slightly without damaging it. Here’s how you can use a ring sizer:

• Use a ring sizer tool: Purchase a ring sizer tool from a jewelry supply store or online.
• Place the ring on the sizer: Slide your ring onto the sizer and find the size that feels most comfortable on your finger.
• Add sizing beads: If the ring still feels loose, you can add small metal balls called sizing beads inside the band to make it fit snuggly.

Using a Liquid Silicone

Liquid silicone is a flexible, clear compound that can be used to resize a ring without any damage to the ring. Here’s how to use liquid silicone:

• Clean your ring: Clean your ring using soap and water and dry it properly with a clean cloth.
• Apply the silicone: Apply a small amount of liquid silicone to the inside of the band, covering the portion that you want to resize.
• Let it dry: Wait for the silicone to dry completely before you wear the ring again. It usually takes 24 hours to dry completely.

Using a Mandrel and Mallet

A mandrel and mallet are tools used by jewelry professionals to resize a ring. If you have these tools at home, you can do this yourself. Follow these steps to resize your ring using a mandrel and mallet:

• Place the ring on the mandrel: Slide the ring onto the mandrel until it fits snugly.
• Tap the ring with a mallet: Use a mallet to gently tap the ring, moving it to the desired size.
• Check the fit: Check the fit of the ring frequently to avoid overstretching it.

Using a Plastic Straw

If you don’t have any special tools available, and you need to resize your ring quickly, you can use a plastic straw. Follow these steps to resize your ring using a plastic straw:

• Cut the straw: Cut a long plastic straw lengthwise, creating a slit in it.
• Slide the ring on the straw: Slide the ring onto the straw, pushing it as far as possible.
• Overlap the ends: Take the edges of the straw and overlap them, creating a tighter sleeve around the ring.
• Try on your ring: Slip the ring off the straw and try it on your finger. If the ring is still too loose, repeat the process with a second straw.

Now that you know how to resize your ring at home, you don’t have to worry about rings that don’t fit you anymore. Try these methods and enjoy your perfectly fitting rings.

Sizing Up: Thanks for Reading!

I hope you found this guide helpful in making your ring bigger. Remember to take your time and be patient, as the process may require some trial and error. There’s nothing wrong with trying it a few times to perfect your skills. If you have any questions, feel free to leave a comment below. Don’t forget to check back for more DIY jewelry tips and tricks. Thanks for reading!