DIY: How to Make Your Own Pen Stylus
In this digital age where almost everything is touchscreen, it’s not uncommon for people to prefer using a stylus over their fingers to navigate on their smartphone or tablet. However, not everyone has a stylus readily available or at an affordable price. The good news is that making a stylus pen is not only easy, but it’s also a cheap and fun DIY project that you can accomplish at home with just a few simple materials.
To make a stylus pen, you’ll need a ballpoint pen, aluminum foil, a small piece of sponge, and clear tape. These items can be found easily at your nearest store or even in your home. You don’t have to be a tech-savvy person to make a stylus pen. With a little patience and following the instructions given, you can make one in no time! So, here’s how to make your very own inexpensive and functional stylus pen.
Creating a pen stylus is easy and requires only a few supplies. In this section, we will provide you with step-by-step instructions on how to make a pen stylus that can be used on mobile devices and touchscreen tablets. Here are ten subheadings that we will cover in this tutorial:
1. Gather Supplies
2. Select a Suitable Pen
3. Remove the Pen Refill
4. Disassemble the Pen
5. Cut a Small Piece of Conductive Foam
6. Insert Conductive Foam into the Pen Barrel
7. Reassemble the Pen
8. Test the Stylus
9. Use an Eraser as a Stylus Cap
10. Customize Your Stylus
1. Gather Supplies
To make a pen stylus, you will need a few supplies that are readily available in your local craft store or online. Here is a list of the things you will need:
– Pen
– Conductive foam
– Scissors
– Cutter
– Tweezers
– Superglue
2. Select a Suitable Pen
The first thing to consider when making a pen stylus is the selection of a suitable pen. The best types of pens to use an ordinary ballpoint pen with a removable refill. It’s essential to select a pen that has a cylindrical barrel with a diameter of at least 8mm. The tip of the pen should be rounded with a slightly pointed shape.
3. Remove the Pen Refill
To start making your pen stylus, you need to remove the pen refill from the pen’s barrel. Grip the pen firmly with one hand and unscrew the cap with the other hand. Once you remove the cap, pull the pen refill out of the barrel slowly.
4. Disassemble the Pen
After removing the pen refill, it’s time to disassemble the pen. Use your fingers to remove the grip and any other components attached to the barrel of the pen. The goal is to have a clean, hollow pen barrel for the next step.
5. Cut a Small Piece of Conductive Foam
The next step is to cut a small piece of conductive foam that will fit inside the pen barrel. The foam should have a length of approximately 1 inch, a diameter of 8mm, and a thickness of 1-2mm.
6. Insert Conductive Foam into the Pen Barrel
Once you have the conductive foam, insert it into the pen’s barrel until it is flush with the end of the barrel. Use a tweezer to ensure that the foam is pushed to the end of the barrel, and there are no air gaps.
7. Reassemble the Pen
After you have inserted the conductive foam, reassemble the pen. Attach the grip and any other attachments you removed earlier to the barrel of the pen. Ensure that the foam is positioned at the end of the barrel. Once you have reassembled the pen, you can use it as a stylus.
8. Test the Stylus
Before you start using the pen stylus, test it on your device’s touchscreen to ensure that it works efficiently. If your device is unresponsive, you may need to adjust the pressure or the position of the foam inside the barrel.
9. Use an Eraser as a Stylus Cap
If you want to prevent the conductive foam from falling out of the pen, you can use an eraser as a stylus cap. Cut a small piece of eraser and place it over the pen tip. Ensure that you push it firmly into place, so it doesn’t fall out.
10. Customize Your Stylus
Now that you have made your pen stylus, you can customize it by painting it in your favorite colors or embellishing it with beads, stickers, or other decorative materials. Personalizing your stylus adds a fun element and makes it easy to recognize.
In summary, making a pen stylus is simple, and you don’t need any sophisticated tools or skills. Follow these steps to make a stylus that works on your touchscreen devices, and enjoy the experience of having a handy tool that allows you to use your screen without leaving smudges and fingerprints.
How to Make a Pen Stylus: Materials Needed
Before we get into the steps on how to make a pen stylus, let’s take a look at the materials you’ll need. Don’t worry—the materials are easy to find and won’t cost you a lot of money.
1. Ballpoint pen: This is the main component of a pen stylus. It’s important to choose a pen with a removable tip.
2. Conductive foam: This is the material that will allow your pen stylus to work on touch screens. You can find this material at your local electronics store or online.
3. Scissors: A good pair of scissors is important to make clean cuts on your conductive foam.
4. X-acto knife: You’ll need an X-acto knife to cut the ballpoint pen and remove its tip.
5. Electrical tape: To secure the conductive foam onto the pen, you’ll need some electrical tape.
6. Pencil: You’ll need a pencil to trace the outline of the foam onto the pen.
7. Ruler: You’ll need a ruler to measure and make precise cuts.
8. Optional: Paint or washi tape for decoration: This step is optional, but if you want to add a personal touch to your pen stylus, you can decorate it with paint or washi tape.
Now that you have all your materials ready, let’s move on to the next step: creating the conductive foam tip.
3. Choosing the Right Material
Choosing the right material is crucial when making a pen stylus. The material determines how comfortable the stylus is to use, its durability, and even the conductive properties that determine if it works on your device screen. Here are a few materials you can use to make your pen stylus:
1. Conductive Foam
Conductive foam is a great material for making a pen stylus as it has excellent conductive properties. It is also soft, which makes it comfortable to use. The foam can be glued to the top of a pen or pencil, and it will work on your device screen. Conductive foam can be bought at an electronics store or online.
2. Copper Tape
Copper tape is another great conductive material that you can use to make a pen stylus. It is adhesive, making it easy to attach to a pen or pencil. Copper tape is also flexible, and you can cut it into any shape you desire. However, it is not as comfortable to use as conductive foam.
3. Conductive Fabric
Conductive fabric is another material you can use to make your pen stylus. It is soft, making it comfortable to hold, and it has excellent conductive properties. Conductive fabric can be glued to the top of a pen or pencil or wrapped around the entire length of the pen. It can be purchased at an online store or your local fabric store.
4. Conductive Paint
You can also use conductive paint to make a pen stylus. Conductive paint is the most flexible of all the materials listed here. You can paint it on any surface, making it easy to customize your pen stylus. It also has excellent conductive properties. However, it is not as comfortable to use as conductive foam or fabric, and it can be messy to work with.
5. Silicon Tips
If you want a material that is already designed for use with touch screens, you can use silicon tips. These tips are available in a variety of shapes and sizes, making it easy to find one that fits your pen or pencil. They are also easy to replace if they wear out or get damaged. Silicon tips can be purchased at an electronics store or online.
Material | Comfort | Durability | Conductive Properties |
---|---|---|---|
Conductive Foam | Very Comfortable | Fairly Durable | Excellent |
Copper Tape | Not as Comfortable | Durable | Good |
Conductive Fabric | Very Comfortable | Somewhat Durable | Excellent |
Conductive Paint | Not as Comfortable | Fairly Durable | Excellent |
Silicon Tips | Comfortable | Durable | Good |
Choosing the right material is essential when making a pen stylus. Consider your preferences for comfort, durability, and conductivity when selecting your material.
Say goodbye to expensive styluses with a DIY pen stylus!
Now, it’s time to unleash your creativity and start making your own styluses. This simple and affordable tool can help you achieve accuracy and precision when surfing the web or drawing on your device. So, take those old pens lying around and transform them into a cool tech accessory! Thanks for reading and don’t forget to visit again for more DIY ideas that will make your life easier and fun. Happy crafting!
Tinggalkan Balasan