DIY Guide: How to Make a Stunning Mesh Wreath in Just a Few Steps

If you’re looking for a fun and creative DIY project, then making a mesh wreath might be just what you need. Mesh wreaths are incredibly versatile and can be used for different occasions, such as holidays, birthdays, or even as home decor. These wreaths are not only easy to make, but they also make beautiful and unique gifts.

To start, you’ll need some basic supplies such as a metal wreath form, mesh ribbon, pipe cleaners, and some embellishments. The best part about making a mesh wreath is that you can customize it to your liking. If you want a wreath that’s simple and elegant, you can use a monochromatic color scheme. If you’re feeling more festive, mix and match colors to create a vibrant and colorful wreath. With a few simple steps, you can have your very own mesh wreath in no time.

Creating a mesh wreath is an easy and fun exercise that can help you create stunning decor for your home or event! In this article, we’ll show you how to make a mesh wreath step-by-step, with 10 subheadings that outline each part of the process. Let’s get started!

Gather Your Materials

Before you start making a mesh wreath, you’ll need to gather the following materials:

• A wire wreath form
• 2 rolls of deco mesh (10-12 inches wide and 10-20 yards long)
• Scissors
• Floral wire
• Ribbon or any other embellishments

Choose Your Colors and Patterns

Deco mesh comes in a variety of colors and patterns, so choose the ones that best match your decor theme. You can use a single color throughout or mix and match.

Attach the Mesh to the Wreath Form

Start by attaching one end of the mesh to the wire wreath form using floral wire. Gather the mesh and scrunch it up, then twist the wire around the wreath form to secure the mesh in place. Continue doing this until the mesh covers the entire form, then cut the mesh and secure the other end with floral wire.

Create Poofs of Mesh

To create the poofs, take 10-12 inches of mesh and gather it in the center, then twist it at the base to form a loop. Use floral wire to attach the poof to the wreath form.

Alternate Colors and Patterns

Continue making poofs of mesh and attaching them to the wreath form, alternating colors and patterns as you go. This will create a full and textured wreath.

Add Ribbon and Other Embellishments

Once you’ve covered the wreath form with mesh, you can add ribbon and other embellishments. Cut the ribbon into strips or bows and attach them to the wreath using floral wire. You can also add artificial flowers, ornaments, or any other decorations you like.

Fluff and Shape the Wreath

After you’ve added all your decorations, fluff and shape the wreath to your desired shape. You can adjust the poofs and add more mesh or decorations if needed.

Hang the Wreath

Finally, choose a spot to hang your wreath. You can use a wreath hanger or a hook to attach it to your door or wall.

Care for Your Wreath

To keep your mesh wreath looking its best, avoid exposing it to direct sunlight or harsh weather. If it gets dusty, you can gently wipe it down with a soft cloth or brush. Store it in a cool, dry place when not in use.

Final Thoughts

There you have it, how to make a mesh wreath in 9 easy steps! With a little creativity and patience, you can create a beautiful wreath that will add a festive touch to your home or event. Enjoy!

Preparing the Mesh

When it comes to making a mesh wreath, the type of mesh you use plays a significant role. It’s essential to choose a durable mesh that can hold its shape without losing its elasticity. The most common type of mesh used for wreath-making is Deco mesh, which comes in various colors and patterns. Here are some steps to help you prepare your mesh for wreath-making:

Step 1: Measure and cut your mesh

Begin by measuring the mesh according to the size of the wreath frame you want to use. A standard wreath frame is usually 16-18 inches, and a 10-inch mesh ribbon is often sufficient. Use a pair of sharp scissors to cut the ribbon to the desired length.

Step 2: Roll the Mesh

After cutting your mesh to the desired length, it’s time to roll it. To create a fuller wreath, fold the mesh at its center and make a loop. Secure the loop’s center by using pipe cleaners or a floral wire. Then, fold the mesh along its center again and make another loop. Continue this process until you achieve your desired fullness.

Step 3: Attach the mesh to the Wreath Frame

Now that your mesh is prepared, it’s time to attach it to the wreath frame. Begin by securing one end of the mesh ribbon to the frame using a floral wire. Twist the wire tightly to ensure the mesh is firmly attached to the frame. Then, secure the other end of the ribbon on the opposite side of the frame.

Step 4: Scrunch the Mesh

To create a full wreath, scrunch the mesh towards the center of the frame. Use your hands to scrunch each section of the mesh ribbon towards the center. Ensure you do this step with care, so you do not squish or damage the mesh.

Step 6: Repeat the Process

Continue scrunching and securing the mesh ribbon to the wreath frame until you complete the wreath’s entire circumference. You may need to repeat the process several times to achieve your desired wreath fullness.

Step 7: Add Embellishments

This is the perfect time to add embellishments to your wreath. Attach a bow ribbon, flowers, or ornaments using a floral wire or hot glue.

Step 8: Finishing Touches

After adding all the desired embellishments, check to see that all the mesh ribbons are evenly distributed on the wreath frame. You can also use scissors to trim any excess mesh that may be loose.

Step 9: Admire Your Handiwork

Now that you have completed your Mesh wreath be sure to take a step back and admire your handiwork.

With these simple steps, you can create a beautiful mesh wreath that stands out and attractively adorns your home or event.

Materials Needed

Before diving into the making of a mesh wreath, let’s first gather the materials that we’ll need. You can get these supplies at any craft store, and they’re relatively affordable.

Wire Wreath Form

The first item on the list is the wire wreath form. It’s the backbone of the mesh wreath, and it comes in different sizes. The size you pick depends on the desired size of the wreath. They come in 8, 12, and 14-inch sizes, with the 14-inch form being the most commonly used.

Deco Mesh

Next on the list is deco mesh, which is a versatile material. It comes in different colors and sizes, and it’s what gives the wreath its fullness. Typically, for a 14-inch wire wreath form, you’ll need two to three rolls of deco mesh, which totals to 10-12 yards.

Pipe Cleaners

Pipe cleaners act as the binding agents for the mesh to the wire. You’ll need about 10-12 pieces of them, depending on the size of the wreath. You can use the same color as the mesh or a contrasting one to give the wreath a pop of color.

Ribbon

Ribbon is an optional addition to the wreath, but it’s an excellent way to add some color and texture. For a 14-inch wreath, you’ll need about 2-3 types of ribbon, with each type being 2 yards long.

Scissors

Last but not least, you’ll need a pair of scissors to cut the mesh and ribbon. It’s essential to have a sharp pair of scissors to get clean cuts, or else your wreath will look untidy.

Happy Wreath-Making!

Congratulations on making your very own mesh wreath! We hope that you found this guide easy to follow and informative. There’s nothing quite like the feeling of completing a DIY project and seeing the end result. We encourage you to experiment with different colors and embellishments to make your wreath truly unique. Thanks for reading, and be sure to visit again soon for more fun and crafty articles. Happy wreath-making!