DIY Pocket Pussy: Easy Steps to Make Your Own Masturbator

Looking for an affordable option for a masturbation toy? Look no further than a homemade pocket pussy! With a bit of creativity and some simple materials, you can create your own pocket pussy that’ll provide hours of pleasure and enjoyment.

The concept of a pocket pussy has been around for centuries, with early renditions using materials such as leather and wooden carvings. Today, the most common materials for making a pocket pussy include latex gloves, plastic cups, and sponges. Whether you’re avoiding the high prices of store-bought options or just looking for a fun DIY project, making a pocket pussy is a simple process that anyone can do in the comfort of their own home. Read on to learn how to make your own pocket pussy!

Now that we’ve covered the basics, let’s get down to business. You’re probably wondering how to make a pocket pussy at home without spending a fortune on expensive sex toys. Don’t worry, we’ve got you covered. Follow our step-by-step guide and you’ll have a DIY pocket pussy in no time!

1. Materials Needed

Before you start building your pocket pussy, let’s go over the materials you’ll need. Although, it might be tempting to use whatever household items you have lying around – it’s important to create something safe, clean, and hygienic.

The materials you’re going to need to construct your pocket pussy are:

– A latex glove
– A roll of duct tape
– A cylindrical object (e.g. toilet paper roll, Pringles container etc.)
– A pair of scissors
– A pen or marker
– Lubricant (if desired).

2. Preparing the Object

The cylindrical object you choose will be the base for your DIY pocket pussy. Make sure it’s clean and dry before you start the project. Measure the length of the object you are using and mark it with a pen or marker.

3. Preparation of the Glove

Take your latex glove and cut off the top portion of the fingers. You may also cut off the part with the thumb for better comfort and flexibility.

4. Stretching the Glove

Next, stretch out the glove and place it on top of the cylindrical object. Ensure that the opening of the glove is evenly wrapped around the object. The fingertips of the glove should cover the bottom side of the object which is marked.

5. Folding

Fold the excess glove over the edges of the cylinder and secure it with a piece of duct tape. This will help to keep the glove in place while you use it.

6. Rolling the Glove

Carefully roll the glove up from the bottom side towards the opening, making sure that the glove remains tightly wrapped around the cylinder.

7. Lubricating the Glove

Add some lubricant into the glove, this will make it more slippery and your DIY pocket pussy will feel more like the real thing.

8. Using the Pocket Pussy

Now, you’re ready to use your DIY pocket pussy. Add more lubricant if needed, and insert your penis into the glove. Squeeze the glove to simulate the tightness and sensation of a real vagina.

9. Cleaning and Disposal

Cleaning your DIY pocket pussy is a crucial step in keeping it hygienic and safe to use. After use, remove the glove and dispose of it in the trash. The cylindrical object inside can either be discarded as well or reuse it in your next session. Make sure to clean it thoroughly if you’re using it again.

10. Conclusion

Making a pocket pussy is an inexpensive, fun, and easy way to improve your solo sex life. The process may be a bit messy, but that’s part of the fun. Once you’ve tried our DIY pocket pussy, you may never want to go back to store-bought sex toys again. Happy experimenting!

The Ultimate Guide on How to Make a Pocket Pussy – Part 2

Now that you understand why a homemade pocket pussy is a fun and simple DIY project, it’s time to learn how to make one. With just a few basic household materials and a little bit of creativity, you can create your own personal pleasure device without spending a lot of money. Let’s look at the ten steps to follow to make your very own fully functional pocket pussy!

1. Gather Your Materials

Before you begin creating your pocket pussy, you need to gather the necessary materials. You’ll need some rubber gloves, a ziplock bag, a couple of sponges or a dishwashing sponge, a piece of PVC pipe, a razor knife, and a rubber band. If you can’t get PVC pipes, you can use a toilet paper roll or any similar objects that can hold the sponges.

2. Choose Your Sponges

The next step is to decide what kind of sponges you’ll use for your pocket pussy. This decision is entirely up to you, but most people prefer sponges that are soft and squishy, such as dishwashing sponges. However, don’t use a scrub sponge or any sponge that has a rough texture. These sponges can damage your penis.

3. Cut the PVC Pipe

Cut the PVC pipe to your desired length with a razor knife. Make sure to use a pipe that can fit your penis correctly. Remember that it’s better to cut a smaller hole than a bigger one. You can always adjust the size later. Also, if you don’t have a PVC pipe, you can use a toilet paper roll or similar items.

4. Put the Sponges in Ziplock Bag

Take two sponges and stack them on top of each other. Fold them in half and push them into the ziplock bag. Make sure to leave a bit of the sponge sticking out of the bag, which will work as a lip on your pocket pussy. Seal the ziplock bag tightly around the sponges.

5. Put the Ziplock Bag in the PVC Pipe

Once the ziplock bag is secure, slide it into the PVC pipe. Ensure that the lip of the sponges is sticking out of one end of the pipe. Leave a little bit of space at the other end of the PVC pipe.

6. Roll the Rubber Band Over the PVC Pipe

Roll the rubber band over the end of the PVC pipe to ensure the ziplock bag is held firmly in position.

7. Cut the Lip of Sponges

Use razor or scissors to cut the excess sponge from the end of your pocket pussy. Concentrate on making a tiny hole on the side of the sponge without puncturing the plastic bag.

8. Use Lubrication

Lubrication is significant to make your experience pleasurable. Use water-based lubrication for your pocket pussy for maximum skin safety. Any lube will work, as long as the lube is water-soluble.

9. Use Your Pocket Pussy

Now that you’re ready to use your pocket pussy, lube up with your preferred choice of lube and slide your member into the hole you cut in the sponge. Remember to take it slow and steady, allowing yourself to adjust as you go.

10. Clean Your Pocket Pussy

After using your pocket pussy, make sure to clean it properly. Rinse out the sponges and allow them to dry. Critically, avoid shellfish, iodine, and other chemicals that may break down the sponges. Refrigerate your pocket pussy to extend its life.

In conclusion, creating your own pocket pussy is a simple, innovative yet stimulating DIY project. The above ten steps on how to make a pocket pussy have outlined each stage to assist you in creating your homemade pleasure device without spending a lot of money. Now you understand how to go about confidently creating and using your own DIY pocket pussy with no hesitation.

5 Easy Homemade Pocket Pussy Ideas

You don’t need to spend a fortune on sex toys to enjoy your solo time. An easy and affordable way to stimulate yourself is by making your own pocket pussy. Here we present five simple and effective homemade pocket pussy ideas.

1. Soap Bar Pocket Pussy

This homemade pocket pussy is the easiest and quickest to make. Start by heating up a large soap bar in the microwave for about 20 seconds to soften it. Once it’s hot, create a hole in the center using a long object like a pen or a pencil. Place a condom inside the hole and stretch it over the soap bar. Secure it with rubber bands on both sides. Use a lubricant to make it more comfortable.

2. Latex Glove Pocket Pussy

This pocket pussy creates an intense and enjoyable experience. Start by filling a latex glove with water until it’s firm. Put the glove inside a sponge and secure the ends. Create a hole in the sponge to insert your male member and use lubricant for a smooth sensation.

3. Pringles Can Pocket Pussy

This homemade sex toy is practical and portable. Start by cutting off both ends of a Pringles can. Place two sponges inside the can and make a hole in the center. Insert a condom inside the hole and stretch it out. Finally, add some lubricant and enjoy!

4. Towel Pocket Pussy

This is a simple, quick, and effective method to create your own pocket pussy. Start by folding a hand towel lengthwise until it’s tight. Place a condom over the towel and secure it with rubber bands on both ends. Use lubricant to enhance the sensation.

5. Cup Pocket Pussy

This pocket pussy is perfect for men who are on the go. Start by cutting a hole in the center of a plastic cup. Take two sponges, soak them in hot water, and place them at the bottom of the cup. Squeeze out the excess water and place a condom over the cup’s opening. Use lubricant as needed.

In conclusion, these homemade pocket pussy ideas can give you a pleasurable experience without breaking the bank. Remember to always use a condom and lubricant for safety and pleasure. Happy solo time!

Thanks for Reading, See You Soon!

That’s it for today’s guide on how to make your own pocket pussy! We hope you found it informative and helpful. Remember, there’s no shame in exploring your sexuality and experimenting with new things. We encourage you to try out different materials and techniques to customize your pocket pussy to your liking. Don’t forget to clean and store it properly to ensure longevity. Thanks again for reading and we can’t wait to see you again soon for more exciting DIY sex toy projects!