How to Make an End Portal in Minecraft

Minecraft is a popular sandbox game where players are free to build and explore their own virtual worlds. One of the key features of the game is the ability to create portals that allow for quick travel between different parts of the game world. The most powerful of these portals is the End Portal, which takes players to the game’s ultimate boss fight with the Ender Dragon. In this article, we will guide you on how to make an End Portal in Minecraft.

Before we begin, it’s important to note that the End Portal can only be found and activated in Survival mode. Additionally, you will need to have a total of 12 Eyes of Ender to complete the portal. These can be obtained by killing Endermen and using their drops to craft Eyes of Ender using Blaze Powder. With that in mind, let’s get started on creating your End Portal in Minecraft!

Section: How to Make an End Portal Minecraft

If you’ve been playing Minecraft for a while, you probably know that there’s a whole other dimension waiting to be explored: The End. But to get there, you’ll need to build an end portal. Don’t worry though, it’s not as complicated as it may seem. All you need is the right materials and a little bit of know-how.

Here’s how to make an end portal in Minecraft, step by step.

Step 1: Gather Your Materials

First things first, you need to gather the materials required to build an end portal. You’ll need 12 end portal frames and 12 ender pearls to activate the portal. You can get these by defeating Endermen, trading with villagers, or finding them in stronghold chests.

Step 2: Find a Stronghold

End portals can only be built in strongholds, so you’ll need to find one first. Strongholds are underground structures that can be found by using Eyes of Ender. Throw an Eye of Ender, and it will fly in the direction of the nearest stronghold. Keep following it until it falls to the ground, indicating that you have arrived at the stronghold location.

Step 3: Locate the End Portal Room

Once you’ve found the stronghold, you need to locate the end portal room. This can be a bit tricky, as it’s hidden away somewhere in the stronghold. The easiest way to find it is by following the sounds of mobs, as they tend to spawn near portal rooms.

Step 4: Place the End Portal Frames

Inside the end portal room, you’ll see a square frame made of end portal frames. You need to place the remaining frames to complete the portal. Make sure to place them in the right orientation. The frames should form a square and face towards the center.

Step 5: Activate the Portal

Once you have placed all 12 frames, it’s time to activate the portal. To do this, you need to put an ender pearl into each frame. Once all frames have an ender pearl, the portal will be activated.

Step 6: Enter the Portal

Now that the portal is activated, it’s time to enter it. Stand in the center of the portal and jump in. The game will load for a few seconds, and then you’ll find yourself in The End.

Step 7: Defeat the Ender Dragon

The End is home to the Ender Dragon, a fierce boss that must be defeated to complete the game. To defeat the Ender Dragon, you’ll need to destroy its healing crystals, avoid its attacks, and deal damage to it until it’s defeated.

Step 8: Loot the End City

Once you defeat the Ender Dragon, you’ll find yourself in an area called the End City. This is a great place to explore and collect loot, including valuable items like elytra wings and shulker boxes.

Step 9: Return to the Overworld

When you’re ready to return to the Overworld, simply enter the end portal again. It will take you back to your spawn point, and you’ll be able to continue playing Minecraft as usual.

Step 10: Enjoy Your Achievement

Congratulations! You’ve successfully built an end portal and defeated the Ender Dragon. Take some time to enjoy your achievement and explore The End. There’s always more to discover in Minecraft!

In conclusion, building an end portal in Minecraft can be a bit of a challenge. But with the right materials and some knowledge, it’s certainly possible. Follow these steps, and you’ll soon find yourself in The End, facing off against the Ender Dragon and collecting valuable loot. Happy exploring!

The Steps to Making an End Portal in Minecraft

If you’re searching for how to make an End Portal in Minecraft, then you’ve probably reached a level of expertise in the game that not many people have. Congratulations! Making an End Portal is a crucial step to accessing the End, where you can battle the game’s final boss – the Ender Dragon. In this section, we’ll go through each step in detail, so you can make your own End Portal with ease.

Step 1: Build a Frame

First, you must build a frame for your End Portal using twelve End Portal Frames. You can obtain these frames by finding them in strongholds or by crafting them in a Crafting Table, using Blaze Powder and Obsidian Blocks.

Step 2: Arrange the Frames

Next, arrange the frames in three rows of three, with a fourth at each corner. Make sure they’re in the correct orientation and lined up correctly. If you’re standing in the middle of the frame, it should look like a square with a hole in the middle.

Step 3: Activate the Frames

To activate the frames, you’ll need to place an Eye of Ender into each one. You can make Eyes of Ender by mixing Ender Pearls and Blaze Powder in a Crafting Table. Once you’ve inserted all twelve Eyes of Ender into the frames, the End Portal will come to life.

Step 4: Enter the Portal

You’re now ready to jump into the End Portal! Be ready, because you’ll be transported immediately to the End.

Step 5: Defeat the Ender Dragon

The primary purpose of the End Portal is to allow you to enter the End and battle the Ender Dragon. This can be a challenging fight, so make sure you’re fully prepared with the right weapons, armor, and supplies.

Step 6: Collect the Dragon Egg

Once you’ve defeated the Ender Dragon, you can collect the Dragon Egg. Be careful! The Egg is protected by an invisible force field, so you’ll need to use a piston to move it.

Step 7: Explore the End

The End is not just a place for the final boss battle – it’s also home to a unique landscape of floating islands and End Cities. Take some time to explore and see what other treasures you can find.

Step 8: Use the End Gateway

Once you’ve collected what you want in the End, you can use the End Gateway to return to the Overworld. You’ll need to activate the Gateway by placing an Ender Pearl into the pedestal.

Step 9: Return to the Overworld

Using the End Gateway will transport you back to the Overworld. You’ll appear on a platform in the sky, so be careful not to fall off!

Step 10: Celebrate Your Achievement!

Congratulations! You’ve successfully made an End Portal and defeated the Ender Dragon. Enjoy your sense of accomplishment and keep exploring the world of Minecraft.

Materials required for making an end portal in Minecraft

If you want to create an end portal in Minecraft, you must first acquire a few necessary materials. Below is a list of materials you’ll require to make an end portal in Minecraft:

Eyes of Ender

Eyes of Ender are an incredibly useful item in Minecraft that are primarily used to find strongholds and subsequently end portals in the game. Eyes of Ender are craftable, and you can make them by combining blaze powder (a drop from killing a blaze mob in the game) with an ender pearl (a rare item that drops from Enderman mobs).

Gathering enough Eyes of Ender to create an end portal in Minecraft can be a challenge, mainly because players need at least 12 Eyes of Ender to complete an end portal (split into 12 distinct blocks).

Obsidian

Obsidian is a solid block that is created from lava and water colliding. It is exceptionally durable and ideal for creating portals such as the end portal, as it is impervious to explosions. Obsidian is also challenging to break, so make sure you have the appropriate tools to mine it before embarking on creating an end portal.

To craft an end portal, you’ll need 12 blocks of obsidian, which can either be mined (with a diamond pickaxe) or found in some locations in the game.

Crafting the End Portal

Once you have 12 Eyes of Ender and 12 blocks of Obsidian, it’s time to start crafting the end portal. Follow the steps below:

1. Dig out the area for the portal. The end portal requires a 5×5 area with a minimum height of 4 blocks.

2. Place the 12 Obsidian blocks in a shape of a ring, building it up to the desired height.

3. Put the Eyes of Ender on the top of each Obsidian block.

4. The Eyes of Ender will activate the portal, and it will turn into a purple swirly portal, which indicates that it’s active.

Locating the End Portal

To find the stronghold containing the end portal, you must use the Eyes of Ender. The Eyes of Ender will lead you to the nearest stronghold each time you throw them in the air.

Keep throwing them until they hover over one spot, and you will know you have found the stronghold. Once inside, navigate your way through the stronghold until you reach the location where the end portal must be activated.

Conclusion

Now that you have learned how to make an end portal in Minecraft and acquired the materials necessary for it, you’re ready to embark on an epic adventure to fight the Ender Dragon, located at the other end of the end portal. The End is home to many exciting things, from new blocks to new mobs, and you’ll have a blast exploring them all!

Thanks for diving in! See you soon in the End!

Congratulations! You have learned how to make an End Portal in Minecraft. It’s a thrilling moment when you finally enter the End and meet the Ender Dragon. But don’t stop here! There’s a whole universe to discover and build in Minecraft. Keep exploring and creating. Thank you for reading and come back soon for more adventures in Minecraft!